Belkin Router Login

Belkin Router Login

Routers would be the present backbone of the attached household. Setting a Belkin router calls for procuring your system by manually simply configuring the router. If you've not done this Even though routers are all made to secure you ready to go very quickly setup might be complicated. Router options come from the management panel. Learn just how exactly to get into the Belkin router to prepare your own administrator password to safeguard your modem safety.



POWER CYCLING THE MODEM AND ROUTER


STEP 1: Start by unplugging the modem and the router from any power source connected.
STEP 2: Use Ethernet cable to connect the modem to the WAN (Internet port) of the router.
STEP 3: Press the ON button to power on the modem (first) then power your router by plugging them back to the power source.

Instructions on how to login to the Belkin router web interface


  1. Make sure that you are connected to your Belkin router, either by ethernet cable or over WiFi. Note: If you're not connected to the network, you won't be able to reach the interface.
  2. Open your browser and type the router's IP address into the address field. The most common IP for Belkin routers is 192.168.2.1. If that IP address doesn't work, you can search the default Belkin IP address list for your specific model, and how to figure out your Belkin router gateway IP address. 
  3. The Belkin web-interface needs to start and request the own username & password. In the event, you are uncertain in regards to the username/password you are able to take a have a look in the default option Belkin qualifications to learn exactly what the preferences are, and also how to reset them.


ROUTER MANUAL SET UP
The step below applies to some Belkin router models. To learn how to set up particular router models click here.
STEP 1: Connect the PC to one of the Ethernet ports (1) of the router

STEP 2: Launch any web page and enter the router default IP address in the address bar and press {ENTER}. Belkin’s router default IP address is 192.168.2.1. Click here for troubleshooting information if you have any difficulty accessing the default IP address. Alternatively, see our default router IP address list.

STEP 3: Click Login

STEP 4: Don’t add a password and click submit.Trouble finding the router web-based setup page click here.

STEP 5: Click Connection Type under Internet WAN

STEP 6: Select Connection Type. Then Click Next 

STEP 7: Enter your ISP details and click Apply Changes Button 

Reference link





Comments

Post a Comment